Passenger

S-110

EN 15551 Certified

  • Light-weight TecsPak™ proprietary elastomer
  • Certified to EN 15551 as per TSI-WAG.
  • Certified to EN 50125 T1, T2, T3
  • Tested for operation from -50°C to +50°C
  • Impervious to oil, grease, dust
  • Abrasion-resistant

These are just a few of the many reasons Miner buffer springs remain the most widely applied in the industry, and the only buffer spring with over 40 years successful service and more than 1 million units supplied.

S-110 Performance Curve

(72 Hours After Installation)

SPRING 72 HOURS DYNAMIC IMPACT
CLOSURE 1ST 3RD 120kN Hammer EN-15551 Table E.6
PRE-FORCE 19kN 12kN 127mm Drop 11.5km/hr
We 17.7kJ 13.9kJ 28.8kJ 22.4kJ
Wa/We 0.52 0.42 0.59 0.57