Crown SE™ Out-of-Car Inspection

1. Tap friction plate in with hammer.
2. Bridge wedges and measure gap between wedges and friction plate.
3. If less than 1/8" gap, gear should be reconditioned (do not reapply).

Before applying any draft gear, inspect for conformance to AAR Rule 21,
Sections A & B.

Crown SE™ Out-of-Car Inspection

1. Tap friction plate in with hammer.
2. Bridge wedges and measure gap between wedges and friction plate.
3. If less than 1/8" gap, gear should be reconditioned (do not reapply).

Before applying any draft gear, inspect for conformance to AAR Rule 21, Sections A & B.