Pad Free Height Limits: Top Cap Assembly Method

1. Remove the top cap assembly 2. Allow 1 minute to stabilize 3. Measure height (see picture below)
TCC-2600*	4-3/8"
TCC-4500	4-3/8"
TCC-8000	4-3/8"
TCC-8000 RL/RS	4-3/8"
TCC-II*+	5-7/8"
TCC-45 LTLP	2-3/4"
TCC-45 LTLP-B	2-3/4"
TCC-LTRB	4-5/16"
TCC-45 LTR	4-5/16"
TCC-60 LTR	4-5/16"

+Note: When car body is raised off the side bearing, top cap should extend to the free height. If the bottom of the cap slot does not maintain contact with the bottom of the retaining bolts, replace side bearings per owner's instructions.

*No longer in production, entire unit will have to be replaced.