TCC-IV LT

Each TCC-IV pad is supplied with a color-coded insulator attached to the top. Each pad assembly is color coded as follows: TCC-IV-30 (Green), TCC-IV-45 (Red), TCC-IV-60 (Blue) and TCC-IV-80 (Grey). The TecsPakĀ® pad inside diameter should easily slide onto the post inside the housing with the insulator facing up. There is a 1/32" clearance between the post diameter at bottom and the inside diameter of the pad. Therefore, if the clearance is greater than 1/32", or it is difficult to assemble the pad over the housing post, the wrong pad has been applied. The top cap post should slide easily into the insulator/pad. The car body wear plate must cover the 3"-wide flat on the top cap.

Reference image below. Choose a TCC-IV install option from the buttons below.

TCC-IV LT

Each TCC-IV pad is supplied with a color-coded insulator attached to the top. Each pad assembly is color coded as follows: TCC-IV-30 (Green), TCC-IV-45 (Red), TCC-IV-60 (Blue) and TCC-IV-80 (Grey). The TecsPakĀ® pad inside diameter should easily slide onto the post inside the housing with the insulator facing up. There is a 1/32" clearance between the post diameter at bottom and the inside diameter of the pad. Therefore, if the clearance is greater than 1/32", or it is difficult to assemble the pad over the housing post, the wrong pad has been applied. The top cap post should slide easily into the insulator/pad. The car body wear plate must cover the 3"-wide flat on the top cap.
Reference image below. Choose a TCC-IV install option from the buttons below.