Find Your DuraShield Trough Hatch Cover!

No match was found. Please call a customer service representative at 630-232-3000 for assistance.

Your ordering information is displayed below. Please call 630-232-3000.

Please write down the part number and item number before performing another search.

  • Manufacturer:
  • Part Number:
  • Item Number:
  • A – End of cover to centerline of first hinge:
  • B – Centerline of first hinge to centerline of last hinge:
  • C – Centerline of first hinge to centerline of middle hinge:
  • D – Overall cover width:
  • E – Overall cover length:
  • F – Inside trough width:
  • G – Distance from inside of trough to center line of hinge pin:
  • H – Distance from top of trough to center line of hinge pin:
  • I – Pin diameter:
  • J – Distance from inside of trough to end of lock tab:
  • K – Distance from top of trough to bottom of lock:
  • L – Distance from top of trough to tallest point on cover:

Use the form below to search our product database for a match to your cover.

* indicates a required field

Personal Information

Numbers only, no dashes.
Search by part # or item #
Search by product description

Please fill in as many dimensions as possible and select the drawing of the cover you are measuring.

If your dimension is not shown please contact miner customer service at 630-232-3000

Drawing*

A End of cover to centerline of first hinge*
B Centerline of first hinge to centerline of last hinge*
C Centerline of first hinge to centerline of middle hinge*
D Overall cover width
E Overall cover length
F

Inside trough width*

G

Distance from inside of trough to centerline of hinge pin*
H Distance from top of trough to centerline of hinge pin*

I Pin diameter*

J Distance from inside of trough to end of lock tab
K Distance from top of the trough to the lock tab
(Pull up on lock to remove play while measuring)

L

Distance from top of trough to tallest point on cover

Measure to the top of the bumper if one exists